Q1 to Q10
Q11 to Q20
21. The laplace transform of damped sine wave e-at sin(wt) is
A) 1 / ((s+a)2+w2)
B) s / ((s+a)2+w2)
C) w / ((s+a)2+w2)
D) w2 / ((s+a)2+w2)
22. A feedback control system has an open loop transfer function given by H G(jw) = 40 / {jw [1+(jw / 5)]}. The phase margin is
A) 21.8o
B) 43.6o
C) 44o
D) None of the above
23. A series LCR circuit consisting of R=10Ω, XL=20Ω and XC=20Ω is connected across an AC supply of 200V rms. The rms voltage across capacitor is
A) 200 _-90 V
B) 200 _ 90 V
C) 400 _ 90 V
D) 400 _-90 V
24. A ramp volatege, v(t) = 100V, is applied to an RC differentiating circuit with R=5kΩ and C=4µF. The maximum output voltage is
A) 0.2 V
B) 2.0 V
C) 10.0 V
D) 50.0 V
25. Two 6V, 2Ω battries are connected in series aiding. This combination can be replaced by a single equivalent current generater and a parellel resistance of
A) 3A, 4Ω
B) 3A, 2Ω
C) 3A, 1Ω
D) 6A, 2Ω
26. In an RLC circuit, v(t) = 20sin(314t + 5π/6) and i(t) = 10sin(314t + 2π/3). The PF of the circuit is
A) 0.5 lead
B) 0.866 lag
C) 0.866 lead
D) 0.5 lag
27. The short circuit admittance matrix of a 2-port network is [0 -½ ; ½ 0]. The 2-port network is
A) Non-reciprocal and Passive
B) Non-reciprocal and Active
C) Reciprocal and Passive
D) Reciprocal and Active
28. The inverse transform of 1/s is
A) δ(t)
B) u(t)
C) u(t-a)
D) t
29. In a sychronous motor, the magnitude of stator back emf. Ev depends on
A) Speed of the motor
B) load on the motor
C) both speed and rotor flux
D) DC excitation only
30. The output y(t) of the system when input x(t) = δ(t) and all initial conditions are zero is defined by
A) unit impluse response
B) unit step response
C) unit ramp response
D) none of the above
Answer: 21-C; 22-D; 23-D; 24-B; 25-A; 26-B; 27-A; 28-D; 29-D; 30-A.
Friday, April 16, 2010
Subscribe to:
Post Comments (Atom)
0 comments:
Post a Comment