TANCET 2007(Q21toQ30)(Questions from Question Paper for Year 2007)
Q1 to Q10
Q11 to Q20
21. When R = 10Ω, Xc = 18Ω and Xl = 12Ω, the current
A) leads the applied voltage
B) lags behind the applied voltage
C) Is in phase with the voltage
D) Is in quadrature with the voltage
22. In a certain series RC circuit the true power is 2W and the reactive power is 3.5VAR. What is the apparent power?
A) 3.5 VA
B) 2 VA
C) 4.03 VA
D) 3 VA
23. How much energy is stored by a 100mH inductance with a current of 1A?
A) 100 J
B) 1 J
C) 0.05 J
D) 0.01 J
24. A shunt generator running at 100rpm has generated emf as 200V. If the speed increases to 1200rpm, the generated emf will be nearly
A) 150 V
B) 175 V
C) 240 V
D) 290 V
25. If a network contains B branches and N nodes then the number of mesh current equations would be
A) B - (N -1)
B) N - (B - 1)
c) B - N - 1
D) (B + N) - 1
26. The highest harmonics generated in human voice is
A) 1 kHz
B) 5 kHz
C) 3 kHz
D) 10 kHz
27. For an SCR, di/dt protection is achieved through the use of
A) R in series with SCR
B) L in series with SCR
C) RL in series with SCR
D) RLC in series with SCR
28. The larger the RAM of a computer, the faster its processing speed is since it eliminates the
A) Need of ROM
B) Need for external memory
C) Frequent disk I/Os
D) Need for wider data path
29. When did Intel announce its 16bit 80286 chip?
A) 1980
B) 1982
C) 1984
D) 1986
30. When a thyristor gets turned ON, the gate drive
A) Should be removed or it will turn OFF the SCR
B) May or may not be removed
C) Should be removed
D) Should be removed in order to avoid increased losses and higher function temperature
Answer: 21-B; 22-C; 23-C; 24-C; 25-D; 26-C; 27-B; 28-B; 29-B; 30-A.
Friday, April 16, 2010
Subscribe to:
Post Comments (Atom)
2 comments:
For 25th question, the answer is A which is B-(N-1).
If there are 4 nodes and 5 branches, the number of mesh equation = (5 - 4 + 1) = 2.
For 21st question XC > XL. phase of voltage will be negative Ф = tan inverse(XL - XC / R).
Therefore current will lead voltage.
Post a Comment